manualshive.com logo in svg

L-3 Communications CEU, Руководство пользователя

"Бесплатное скачивание руководства пользователя для продуктов L-3 Communications CEU. Получите подробную информацию о вашем устройстве, включая инструкции по эксплуатации, здесь: manualshive.com. Скачивайте руководства прямо сейчас и ознакомьтесь с функциональностью вашего устройства."

Поделиться
Скачать
background image

STE User’s Manual 

8510 Capabilities 

Rel. 2.6

 

9-3

A voice bearer may contain analog links, it is terminated on a digital switch, it will support STU and SCIP 
signaling and it also may support STE signaling if the bearer passes a voice bearer secure capabilities 
test during security negotiation.  Passing the capabilities test confirms that the connection is digital end-
to-end and can support STE signaling. 
A data bearer between two STEs provides an end-to-end digital connection that can support STU, SCIP, 
and STE signaling.  The data bearer support of STE signaling, provides the highest level of voice quality 
and the highest available data rates.  A voice-bearer call-appearance will illuminate one of the LEDs 
associated with the call appearance buttons on the face of the STE. 
A data-bearer call appearance activates a special character in the lower left corner of the STE display.  
Data-bearer call appearances are controlled by the first two buttons on the left side of the STE as shown 
in 

Figure 9-1

.  The upper button is associated with the first data-bearer call appearance.  The special 

character “

” 

is associated with the first data bearer call appearance and has been given the 

designation of “Cy”.  The second button on the left side of the STE is associated with the second data-
bearer call appearance.  The special character “

”

 is associated with the second data bearer call 

appearance and has been given the designation of “Clops”.  When both calls appearances are active the 
indicator appears as one big “

”, hence the reason for the nickname “Cy Clops”. 

9-2.1.4 Data 

Number/Voice Number for DEFINITY 

The DEFINITY switch must be provisioned with both a voice station and data module to allow the STE to 
use the high quality voice and high speed data capabilities of STE signaling.  If a data module is not 
provided the STE may be limited to SCIP and STU signaling using the voice module.  Each module has a 
specific extension, the voice station will have one extension number and the data number a separate 
extension number.  What this means is for normal non-secure voice calls, calling parties will use the 
number of the voice station.  For calling parties attempting SCIP or STU calls, the voice station number 
must also be used.  For STE signaling (voice or data calls, including secure casual conferencing) the 
calling party must call the data module number.  If the data module number is called for a non-STE call, 
the calling party will get a busy signal. 

9-2.1.5  No Directory, Call Log or Clock Capabilities 

The STE does not support Personal Directory storage, a local clock, or the capability to Log calls..  
However, the STE does provide the capability to store Speed Dial” numbers and access abbreviated 
dialing lists. 

9-2.1.6  No Remote Control 

When configured for operation with the STE-8510 switch type, the STE does not support any remote 
control operations. 

9-2.1.7  No Adjunct Control Permitted 

The STE does not permit the switch to control the STE speakerphone using adjunct control messages. 
Due to the secure nature of the STE, it does not respond to any adjunct control messages from the 
switch.. 

9-2.1.8  Bridging and Exclusion Specifics – Failed Auto-Secure Can Not Be Excluded 

Manually 

Since the STE-8510 feature allows shared or bridged call appearances with other extensions, secure 
calls on voice bearers can also be bridged.  Bridging onto a secure call is not a security issue since all 
classified information is encrypted before getting to the switch.  The bridging extension will only hear 
modem signaling on an SCIP or STU call.  If the bridged call is a STE call on a voice bearer, the secure 
call typically fails.  Bridging is a switch function and is not under the control of the STE.  If you typically 
place secure voice calls, you may request that the switch administrator provision your extension with the 
auto-exclusion feature.  This feature will prevent other shared call appearances from bridging onto calls at 
your terminal.  The exclusion and auto-exclusion switch features are discussed in a later section of this 
chapter. 
 

Содержание CEU

























































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для CEU

Panasonic KX-TG2720S Description preview
KX-TG2720S
Бренд: Panasonic Страницы: 3
Panasonic KX-TG2564S Description preview
KX-TG2564S
Бренд: Panasonic Страницы: 3
Panasonic KX-TG2750S Operating Instructions preview
KX-TG2750S
Бренд: Panasonic Страницы: 3
Panasonic KX-TG2451 Description preview
KX-TG2451
Бренд: Panasonic Страницы: 2
Panasonic KX-TG2238S Description preview
KX-TG2238S
Бренд: Panasonic Страницы: 3
Panasonic KX-TG1861AL Quick Manual preview
KX-TG1861AL
Бренд: Panasonic Страницы: 8
Panasonic KX-TG2214W Description preview
KX-TG2214W
Бренд: Panasonic Страницы: 2
Panasonic KX-TCM420-B Operating Instructions Manual preview
KX-TCM420-B
Бренд: Panasonic Страницы: 64
Panasonic KX-TD612NE Installation Manual preview
KX-TD612NE
Бренд: Panasonic Страницы: 87
Panasonic KX-TG365SK Quick Manual preview
KX-TG365SK
Бренд: Panasonic Страницы: 10
Panasonic KX-TC2000NZB Operating Instructions Manual preview
KX-TC2000NZB
Бренд: Panasonic Страницы: 8
Panasonic KX-TCA185 Operating Instructions Manual preview
KX-TCA185
Бренд: Panasonic Страницы: 88
Panasonic KX-TDA50 Configuration Manual preview
KX-TDA50
Бренд: Panasonic Страницы: 9
Panasonic KX-TG2700 Description preview
KX-TG2700
Бренд: Panasonic Страницы: 3
Panasonic KX-TDA50 Operating Manual preview
KX-TDA50
Бренд: Panasonic Страницы: 214
Panasonic KX-TD612NE Service Manual preview
KX-TD612NE
Бренд: Panasonic Страницы: 126
Uniden FP100 Operating Manual preview
FP100
Бренд: Uniden Страницы: 20
Xblue Networks 45P Installation & Maintenance Manual preview
45P
Бренд: Xblue Networks Страницы: 241

Бренды по названию

Популярные бренды

Загрузить еще бренды