Krone Big Pack 1270, Оригинальная инструкция по эксплуатации, Страница: 53 / 440

Machine description 4
Description of functions of electric knotter monitoring 4.15
BiG Pack 1270
Original Operating Instructions 150000747_02_en 53
4.15 Description of functions of electric knotter monitoring
For “Comfort 1.0” version
BP000-070
The machine is equipped with an electrical knotter monitoring. In this process, each knotter is
monitored individually by a sensor (1). If an error has occurred on the knotter, an error message
will appear on the display of the terminal,
refer to page 236 .
The knotters are numbered from 1 to 6 in direction of travel from left to right.
4.16 Description of knotter gearbox functions
BP000-071 / EQ000-072
Knotter gearbox in idle position
The knotter gearbox is in idle position if the trigger roller (1) is located in the recess of the cam
disc (2) of the knotter gearbox.
Tying process
For „double knotter“ version
The tying process consists of one rotation of the cam disc (2). The system automatically triggers
the knotting mechanism after the set bale length has been reached. In this process, the cam
disc rotates, presses the trigger roller out of the recess and continues to rotate until the trigger
roller slides into the recess again. While the cam disc rotates, the first knot (closing knot) is tied
at first and immediately after that the second knot (starting knot) is tied.
1st knot: Closing knot, ties the pressed big bale.
2nd knot: Starting knot, ties the initial knot for the next big bale.