Krone Big Pack 1270, Оригинальная инструкция по эксплуатации, Страница: 340 / 440

22 Repairs, maintenance and settings by technicians
22.16 Checking/setting Variable Filling System (VFS)
340
BiG Pack 1270
Original Operating Instructions 150000747_02_en
22.16.8 Setting stop of the sensing rake
BPG000-049
ü The machine is shut down and safeguarded, refer to page 27 .
„
Loosen the nuts (19) and move the stop (10) to the rear.
„ Pull the sensing rake (11) to the rear to initiate the Variable Filling System.
„
Release flywheel brake, refer to page 92 .
„ Turn the flywheel manually in working direction until the grooved ball bearing (7) is on the
highest position (area (I)) of the cam disc (5).
Æ
In this position, the tines (18) of the sensing rake (11) must be outside (II) of the packer tray
(12).
„
Check if the tines (18) are outside (I) of the packer tray (12).
Æ
If the tines are not outside the packer tray:
„ Correct the length of the threaded rod until the tines are outside the packer tray.
Setting the stop
„ Move the stop (10) until the dimension is X=2 mm .
„
Tighten the nuts (19).