Krone Big Pack 1270 Скачать руководство пользователя страница 328

Страница: 328 / 440

Repairs, maintenance and settings by technicians

22.14 Setting the plunger

328

BiG Pack 1270

Original Operating Instructions 150000747_02_en

22.14.2

Checking/setting the cleaning rails

BP000-216

The cleaning rails (1) are positioned on the 4 rolls (3) of the plunger. They remove dirt deposits
from the running rails of the plunger.

The machine is shut down and safeguarded,

refer to page 27

Check dimension X.

If the dimension is

X=1–2 mm

, the setting is correct.

If the dimension is

not X=1–2 mm

, the cleaning rails (1) must be adjusted.

Setting

Loosen the screws (3).

Adjust the cleaning rails (1) to dimension

X=1–2 mm

Tighten the screws (3).

Repeat this procedure for all cleaning rails.

22.14.3

Lateral setting of plunger

BP000-217

The plunger (1) must be centred in the bale channel (2).

Содержание Big Pack 1270

























































































































































































































































































































































































































































Результаты поиска

Содержание Big Pack 1270

Отзывы:

Krone Big Pack 1270, Оригинальная инструкция по эксплуатации, Страница: 328 / 440

Результаты поиска

Содержание Big Pack 1270

Отзывы: