Krone Big Pack 1270 Скачать руководство пользователя страница 112

Страница: 112 / 440

Operation

9.17

Fitting wheel chocks

112

BiG Pack 1270

Original Operating Instructions 150000747_02_en

Releasing

In order to release the parking brake (1), turn the crank handle (2) anti-clockwise until the
brake cable slightly sags.

Applying

In order to apply the parking brake, turn the crank handle (2) clockwise until a noticeable
resistance can be felt.

INFORMATION

In order to prevent the machine from rolling away, use the wheel chocks in addition to the
parking brake,

refer to page 112

9.17

Fitting wheel chocks

BPG000-065

The machine is shut down and safeguarded,

refer to page 27

Place the wheel chocks (1) tightly up against the wheel, in front of and behind it, to prevent
the machine from rolling away.

For the "Self-steering axle" version

: Place the wheel chocks (1) tightly in front of and

behind the same wheel of the front axle to prevent the machine from rolling away.

INFORMATION

In order to prevent the machine from rolling away, use the parking brake in addition to the
wheel chocks

refer to page 111

9.18

Initiate the tying process manually

It is only necessary to trigger the tying process manually when performing maintenance,
adjustment and repair tasks.

Содержание Big Pack 1270

























































































































































































































































































































































































































































Результаты поиска

Содержание Big Pack 1270

Отзывы:

Krone Big Pack 1270, Оригинальная инструкция по эксплуатации, Страница: 112 / 440

Результаты поиска

Содержание Big Pack 1270

Отзывы: