Krone Big Pack 1270 Скачать руководство пользователя страница 352 | Manualshive

Страница: 352 / 440

Krone Big Pack 1270 Скачать руководство пользователя страница 352

23

Storage

352

BiG Pack 1270

Original Operating Instructions 150000747_02_en

INFORMATION

Follow the operating instructions of the universal shaft manufacturer.

Liberally grease the uncoated piston rods of all hydraulic cylinders and insert as far as
possible.

Wet all lever joints and bearing positions, which cannot be lubricated, with oil.

Touch up damaged paint and preserve uncoated areas thoroughly with rust protection
agent.

Check that all moveable components move freely. If required, dismount, clean, grease and
remount.

If parts need to be replaced, use only KRONE original spare parts.

INFORMATION

Write down all repair jobs which must be performed by the next harvest and arrange for them
to be done with sufficient lead time. Your KRONE dealer is better able to perform
maintenance service and any required repairs outside the harvest season.

«
...
350
351
352
353
354
...
»

Содержание Big Pack 1270

























































































































































































































































































































































































































































Отзывы:

Нет отзывов