Krone Big Pack 1270, Оригинальная инструкция по эксплуатации, Страница: 49 / 440

Machine description 4
Description of pick-up functions 4.8
BiG Pack 1270
Original Operating Instructions 150000747_02_en 49
4.8 Description of pick-up functions
BPG000-016
The pick-up (1) is used to pick up the crops.
The pick-up (1) starts to rotate when turning on the PTO shaft.
The pick-up (1) is raised and lowered via the single-acting control unit ( ) on the tractor,
refer to page 103 .
The pick-up (1) is equipped with guide wheels (2). The working height of the pick-up (1) is set
via the guide wheels (2),
refer to page 194 .
The bearing pressure of the guide wheels (2) can be adjusted to the ground conditions via the
spring (3),
refer to page 196 .
NOTICE
Damages to the guide wheels and increased wear at the pivot point of the pick-up if the
lowering of the pick-up is not limited
If the lowering of the pick-up is not limited by means of the depth limiters (4), the guide wheels
may be damaged or there will be an increased wear at the pivot point of the pick-up when
passing deep furrows.
„
Limit the lowering of the pick-up by means of the depth limiters (4), refer to page 195 .
The working height of the pick-up can be limited downward manually by moving the depth
limiters (4) on both sides of the machine so that the crops can be taken up without using the
guide wheels,
refer to page 195 .
4.9 Description of functions of crop press roller unit
BPG000-017