Krone Big Pack 1270 Скачать руководство пользователя страница 106

Страница: 106 / 440

Operation

9.13

Lifting/lowering bale chute

106

BiG Pack 1270

Original Operating Instructions 150000747_02_en

BP000-134

Switch off the PTO shaft and wait until trailing machine parts have come to a complete stop.

Secure tractor against rolling away.

Apply parking brake,

refer to page 111

Apply flywheel brake

refer to page 92

Without “Load Sensing” version:

Actuate the control unit (

Unlock the mechanical locking (1) of the bale chute.

WARNING! Increased risk of injury!

While the bale chute is being lowered, ensure that

there is nobody in the danger zone (particularly behind the machine).

Keep

pressed until the bale chute is lowered.

Via the external momentary switches

BP000-135

Actuate the control unit (

Unlock the mechanical locking (1) of the bale chute.

Lowering into working position

Keep the momentary switch (2) pressed until the bale chute is lowered.

Lifting into transport position

Keep the momentary switch (3) pressed until the bale chute is fully lifted.

Close the mechanical locking (1) of the bale chute.

Содержание Big Pack 1270

























































































































































































































































































































































































































































Результаты поиска

Содержание Big Pack 1270

Отзывы:

Krone Big Pack 1270, Оригинальная инструкция по эксплуатации, Страница: 106 / 440

Результаты поиска

Содержание Big Pack 1270

Отзывы: