Krone Big Pack 1270, Оригинальная инструкция по эксплуатации, Страница: 337 / 440

Repairs, maintenance and settings by technicians 22
Checking/setting Variable Filling System (VFS) 22.16
BiG Pack 1270
Original Operating Instructions 150000747_02_en 337
„
Tension the spring (2), refer to page 337 .
„
Set the rubber buffer at the zero adjuster, refer to page 337 .
Checking the clearance of the ratchet
„ Release flywheel brake, refer to page 92 .
„
Turn the flywheel manually in working direction ( refer to page 113 ) until the roll (4) engages
again in the zero adjuster (3).
„
Make sure that tripping ratchet (6) does not move during the whole process.
22.16.4 Setting the rubber pad on the zero adjuster
BP000-236
ü The machine is shut down and safeguarded, refer to page 27 .
ü
The Variable Filling System (VFS) is in zero position, refer to page 335 .
„ Place or remove washers under the rubber buffers (16) until the dimension is X=0–2 mm .
22.16.5 Checking/setting spring at zero adjuster
BP000-237
The spring (2) is set in the factory to X=185 mm .
ü The machine is shut down and safeguarded, refer to page 27 .
ü
The Variable Filling System (VFS) is in zero position, refer to page 335 .
„
Check the dimension X.
ð If the dimension is X=185 mm , the setting is correct.
ð
If the dimension is not X=185 mm , the spring (2) must be set.
„
Set the spring (2) to dimension X=185 mm .