Krone Big Pack 1270, Оригинальная инструкция по эксплуатации, Страница: 234 / 440

20 Maintenance - Compressor
20.2 Checking oil level and changing oil at compressor
234
BiG Pack 1270
Original Operating Instructions 150000747_02_en
INFORMATION
Clean the air filter (1) at least once a day or several times a day in case of high dust load. For
heavy accumulations of dirt in the air filter, the intake manifold (2) can be attached directly to
the cabin roof of the tractor using a retrofit kit (order No 00 287 363 *).
„
Shut down and safeguard the machine, refer to page 27 .
„
Observe the intervals for cleaning/changing the filter element, refer to page 201
„ Clean the area around the air filter (1) and make sure that no foreign bodies get into the air
filter.
„
Move the retaining bracket (3) on the air filter (1) up/down.
„
Remove the cover (5).
„
Remove the filter cartridge (4), knock out the dirt and blow it out from the inside to the
outside with an air jet.
ð Replace the filter cartridge (4) in case it is excessively soiled or damaged.
„
Disassemble and tap out the cover (5).
„ Install the filter cartridge (4).
„
Attach the cover (5) to the air filter (1) and secure it with retaining brackets (3).
„ Check visually that the cover (4) is sealed tightly with the air filter (1).
20.2 Checking oil level and changing oil at compressor
BP000-268
„
Comply with the safety routine "Safe execution of oil level check, oil and filter element
exchange",
refer to page 28 .
Checking oil level
„
Thoroughly clean the area around the oil dipstick (1).
„ Pull out the oil dipstick (1), clean and push in all the way. Use a lint-free cloth to clean the oil
dipstick.
„
Pull out the oil dipstick (1) and read off oil level.
ð
If the oil on the dipstick is below the Y marking:
„
Refill the oil via the filling hole of the oil dipstick (1).
„
Check the oil level.
ð If the oil on the dipstick is between the markings X and Y:
„
Push in the oil dipstick (1).