Korg iS35, Руководство пользователя

Страница: 87 / 249

Reference • Arrangement Play mode
79
ARR HarmonyRef
(Arrangement Harmony Reference)
[Auto, Global, MIDI]
Auto The harmonization chords are
related to the chord recognition area
of the automatic accompaniment.
This area is determined by the Chord
Scanning section (see “Tempo and
chord scanning” on page 64). For
example, if Chord Scanning is
LOWER, the harmonization refe-
rence notes will be taken on the left
of the split point.
Global The settings are the ones in “Page
10: Arrangement Harmony” of the
Disk/Global mode (see page 156).
MIDI The chords are received via MID over
the channel programmed in “Page
10: Arrangement Harmony” of the
Disk/Global mode (see page 156).
The notes played on the iS35 inte-
grated keyboard are not sent to the
vocal harmonizer. This setting allows
for controlling harmonization with a
keyboard other than the iS35 inte-
grated keyboard.
Oct (Octave)
[-3…0…+3]
Octave transposition of the harmonization notes. If, for
instance, you select a very low range for note recogni-
tion, and you need to harmonize a very high female
voice, this parameter will allow you to raise the pitch
of the harmonization notes and bring them to the same
height as the voice.
Range
[C-1…G9]
Lowest and highest note of the area where the harmo-
nization notes are transported. If you play a note
above or below this area on the keyboard, the note will
be transported inside the area. The minimum range is
one octave.