Korg iS35, Руководство пользователя

Страница: 116 / 249

Reference • Backing Sequence mode
108
Time signature
This indicates the time scanning of the measure, i.e. (a)
number of movements in which it is divided, and (b)
scanning unit.
●
End of track
This display indicates the end of the track.
●
Event
Position
[1:00…8:95]
This indicates the position of the event within the
measure. The value is displayed in the form of “quar-
ter:tic” (1 tic = 1/96th of a quarter note). If the abbrevi-
ation TIE appears, the note has been tied to the last
note in the previous measure.
Event type
The following table shows the event type and possible
values.
You can insert an event before the displayed event by
pressing the INS button. However, it is not possible to
carry out this operation if the bar line (BAR event) of
the first measure is selected.
You can delete the displayed event by pressing the
DEL button. It isn’t possible to delete BAR (bar line) or
the End of Track indicator.
*1. If connected to a note in the next measure, this will
be displayed as TIE.
*2. The pitch bend value is divided in two parts of two
digits each. Use the CURSOR buttons to switch
from one part to the other.
*3. The LSB values of the Bank Select message can be
000…127, whereas the MSB value is always 0. “- - -”
means that the bank is not transmitted, and the pre-
viously selected bank will be left unchanged.
*4. MIDI Polyphonic Key Pressure (Poly Touch) mes-
sages will be transmitted, but not received.
Position
Type of event
Measure number / Index number
Type of event Value
C-1…G9
(note number) V:002…V:126
(velocity)
0:00…4:00 *1
length
(beats: clock)
BEND
(pitch bend) –8192…+8191
(upper/lower)
*2
AFTT
(aftertouch) 000…127
(intensity)
PROG
(bank select:program
change)
000…127:
000…127
*3
(bank: number of
program)
CTRL
(control change)
C000…C127
(control change
number)
000…127
(control number)
PAFT
(polyphonic after-
touch)
*4
C-1…G9
(note number) 000…127
(value)