
Getting Started •
MIDI
56
4
Program the piano to transmit over channel 1
(see the piano instructions manual).
5
Press DISK/GLOBAL to go to the Disk/Global
mode.
6
Press the PAGE [+] button repeatedly to get to
“Page 3: MIDI Settings” (see page 150).
7
Press CURSOR> to select SETUP, the press
ENTER/YES to enter the MIDI Setup page.
8
Select the desired setup using the TEMPO/
VALUE buttons (or the DIAL). Select one of the
“Digital piano” setups and press ENTER/YES
twice to confirm the selection.
At this stage the Echo Back function will be acti-
vated (see page 152) and a Local Off message will
be sent to the piano. The piano keyboard will be
disconnected from its internal sound generation.
The MIDI messages will be sent to the iS35 that will
send again them to the internal sound generator of
the piano, taking the split point into consideration.
The left hand will play the accompaniment chords
and the right hand will play the digital piano. If
you have selected “Digital Piano 2”, you can use
the buttons of the Keyboard Assign section to add
the Upper 1, Upper 3 and Lower tracks of the iS35
to the piano.
This setup is illustrated below.
Note:
The settings can change when new data is
loaded from disk. To protect the settings from loading,
use the PROTECT function (see page 150).
9
Press a button in the MODE section to go to the
desired operative mode.
The MIDI “Digital piano” Setups
You can automatically configure the iS35 for the con-
nection to a digital piano by selecting the MIDI “Dig-
ital piano 1” or “Digital piano 2” Setup (see page 150).
Digital piano 1.
This MIDI Setup allows you to play
the chords of the automatic accompaniment with your
left hand and the sound of the digital piano with your
right hand.
The special Chord 1 channel is programmed over the
MIDI 1 channel. The Lower part of the piano is muted.
The chords for the accompaniment are detected on the
left-hand side of the split point. If the Chord Scanning
selected in the control panel is LOWER, the chord rec-
ognition mode is the one indicated by the “Chor-
dRecog (Chord recognition mode)” parameter in the
Global mode (see page 162). If it is UPPER or FULL,
the chord recognition mode is always “Fingered 2”.
Digital piano 2.
This MIDI Setup allows you to play
the chords of the automatic accompaniment with your
left hand and the sound of the digital piano with your
right hand. Moreover, you can use the buttons of the
Keyboard Assign section to activate or deactivate the
Lower part (left hand) and the Upper 1 and Upper 2
parts (right hand) of the iS35.
Suggestion:
If you only wish to play the iS35 parts,
and not the piano sound, set the piano volume to zero.
Suggestion:
Lower the volume of the two instruments
(piano and iS35) to avoid the production of very loud
sounds.
Global and Chord 1 are programmed over channel 1.
The chord recognition mode is determined by the sta-
tus of the CHORD SCANNING section in the control
panel and by the “ChordRecog (Chord recognition
mode)” parameter in the Global mode (see page 162).
The chord recognition mode is determined by the sta-
tus of the CHORD SCANNING section in the control
panel and the “ChordRecog (Chord recognition
mode)” parameter in the Global mode (see page 162).
Содержание iS35
Страница 1: ...AI2 Synthesis System User s Guide Interactive Music Workstation iS35...
Страница 9: ...GETTING STARTED...
Страница 71: ...REFERENCE...