Reference •
Backing Sequence mode
96
Note:
If the iS35 is played by a master keyboard or
other MIDI controller, the MIDI controller must transmit
over the Global, Chord 1 and/or Chord 2 channel.
1
Use the CURSOR buttons to bring the cursor to
the keyboard track. Use the TEMPO/VALUE but-
tons (or the dial) to select the “----” status (deac-
tivated track).
2
Move the cursor to the control track and select
the status “----” (deactivated track).
Now only the chord track is in recording mode
(REC status).
3
Press START/STOP to start the recording and the
accompaniment.
After a two-measure pre-count, the recording will
start.
4
Play the chords in the chord detection area.
The accompaniment will start playing.
5
At the end of the chords, press START/STOP to
stop the recording.
The recording will stop and the REC/WRITE/LYR-
ICS led will go off. The sequencer will go back to
measure 001.
6
Press START/STOP again to listen to the chords
you have just recorded.
The song will be played from the beginning to the
end. When finished, the sequencer will go back to
measure 001. You can stop the playback halfway by
pressing START/STOP; in this case, press RESET to
return to measure 001.
Recording the control track
Note:
The MIDI controller are not received via MIDI.
1
Press REC/WRITE/LYRICS to go back to the
recording mode.
The REC/WRITE/LYRICS will light up and the
recording page will appear.
2
Move the cursor to the chord track and set the
CHRD status (e.g. already recorded).
3
Move the cursor to the control track and select
the REC status (e.g. recording the track).
Now the keyboard track is in the “---” status (deac-
tivated), the control track in the REC status (record-
ing), the chord track in the CHRD status (already
recorded and being played). Only the control track
is in the recording status.
4
Press START/STOP to start the recording. Press
immediately one of the INTRO/ENDING buttons
to book the intro.
After a two-measure pre-count, the arrangement
will start playing and the recording will start with
an introduction.
5
Before the end of the intro, press one of the
VARIATION [1]–[4] buttons to select the varia-
tion.
6
To insert a fill-in, press one of the FILL [1] or [2]
button.
The fill-in will be played and then the variation will
start again.
7
At the end, press one of the INTRO/ENDING
buttons to play the ending. Press START/STOP to
stop the recording.
The recording will stop and the REC/WRITE/LYR-
ICS led will go off. The sequencer will go back to
measure 001.
Real time tracks
Chord track
Control track
Metronome
Tempo mode
Quantize value
Selected track/s
Содержание iS35
Страница 1: ...AI2 Synthesis System User s Guide Interactive Music Workstation iS35...
Страница 9: ...GETTING STARTED...
Страница 71: ...REFERENCE...