Korg iS35, Руководство пользователя

Страница: 42 / 249

Getting Started • Tutorial
34
1
With the accompaniment stopped, press one of
the INTRO/ENDING [1] or [2] buttons.
2
Start the automatic accompaniment with START/
STOP (or SYNCHRO-START + played notes).
The introduction will be played, then the normal
accompaniment pattern will begin (“Variation”).
Note:
Intro 1 plays different chords and creates a
new harmonization, while Intro 2 plays using the rec-
ognized chord only.
3
Play normally, then press one of the INTRO/
ENDING [1] or [2] buttons.
The ending will be played and the accompaniment
will stop.
Note: Ending 1 plays different chords and creates a
new harmonization, while Ending 2 plays using the
recognized chord only.
Variations
Variations are different versions of the same style Each
style has four variations.
1 Start the accompaniment (with START/STOP,
INTRO/ START/STOP, or SYNCHRO-
START + played notes).
2 Press one button in the VARIATION section.
The led of the selected variation will start flashing.
At the end of the measure the pattern will change.
The led of the new variation will stay lit.
3 Press one of the FILL buttons and straight away
afterwards one button in the VARIATION sec-
tion.
The fill-in will play. The led of the variation that is
going to play at the end of the fill-in will flash. At
the end of the fill-in the new variation will play.
4 Press START/STOP or INTRO/ENDING to stop
the accompaniment.
Note:
On “Page 5: Ensemble/Variation change” in
the Arrangement Play mode, you can connect each
FILL button to a variation that will be selected automat-
ically after the fill-in has finished.
All the tracks, at once!
1 With the SYNCHRO-START led off, play a chord
in the chord recognition area.
2 Press START/STOP (or INTRO/
START/STOP) to start the accompaniment.
The accompaniment tracks (Drum, Percussion,
Bass, Acc1, Acc2, Acc3) will start playing.
3 Press START/STOP or INTRO/ENDING to stop
the accompaniment.
Fade in/out
This button can be used instead of the START/STOP
button.
1 With the accompaniment stopped, play a chord
in the chord recognition area, then press FADE
IN/OUT to start the accompaniment.
The accompaniment will start. The volume of the
accompaniment tracks and the keyboard tracks will
be set at zero, and will gradually increase to full.
2 While the accompaniment is playing, press
FADE IN/OUT to stop the accompaniment.
The volume of the accompaniment tracks and the
keyboard tracks will gradually decrease to zero. At
the end, the accompaniment will stop and the vol-
ume will come back to full.
Varying the tempo
●
With the accompaniment stopped, use the
TEMPO/VALUE buttons (or the DIAL) to vary the
tempo.
In order for these controls to work as tempo con-
trols, the TEMPO indication must appear on the
left-hand side of the display.
There is an easier way to vary the tempo, which is
as follows:
1
Set (beat) the tempo on the TAP TEMPO button.
The tempo shown on the display will change
according to the tempo beaten.
2 Start the accompaniment.
3
Vary the tempo with the TEMPO/VALUE buttons
(or the DIAL).
4
Stop the accompaniment with START/STOP or
INTRO/ENDING.