Reference •
Song Edit mode
128
Page 3: Track parameters
In this page you can view and modify the parameters
of each individual track.
Tr (Track)
[01…16]
Select the track you wish to edit using the buttons in
the VOLUME/PROGRAM section. The track that cor-
responds to each pair of buttons will be indicated in
the display above the volume indicator. Move from
tracks 1-8 to tracks 9-16 by pressing the TRACK
SELECT button. The program of the selected track will
play on the keyboard.
Program
[A11…U88, Dr11…Dr28]
Program that is assigned to the selected track. Select
the program using the buttons in the PROGRAM sec-
tion. To select a drum program (Dr11–Dr28), press
repeatedly F(USER/DRUM) until the abbreviation
“Dr” appears in the display, then select a two-digit
number with the number buttons.
Note:
Channel 10 is preferably assigned to a DRUM
program according the General MIDI specifications.
Ch (MIDI Channel)
[01…16]
MIDI channel of the track. If a song is converted into a
Standard MIDI File with the function on “Page 13:
Save”, the MIDI channels specified here will be used.
You can assign the same channel to more than one
track. However, to keep these settings the song must
be saved as an SMF in format 1 (see page mentioned
above).
Pan
[OFF, L15…CENT…R15, PRG]
Stereo positioning of the track. This works as level for
the A and B channels of the internal tone generation
(see the “Effects” chapter). The A and B channels nor-
mally represent the direct signal (A=Left, B=Right). If
the effect configuration is not Parallel 3, the A and B
channels can work as send levels. see “Page 10: Effect
placement”.
CNT
In the center.
L values
To the left (Left, A channel).
R values
To the right (Right, B channel).
OFF
The track does not come out on the A
and B channels.
PRG
Uses the pan setting of the program.
C=/D= (Effect send)
[0…9, P]
Level of the signal sent to the effects. Normally, the C
channel is the send to reverb and the D channel is the
send to the modulating effect, (chorus, flanger...). If the
effect configuration is not Parallel 3, the C and D chan-
nels may work differently. see “Page 10: Effect place-
ment”.
0-9
Effect level. When the value is 0, the
channel does not come out on the
internal C/D channels.
P
Uses the value of the program.
Track
Program
Pan
Send levels
MIDI channel
Содержание iS35
Страница 1: ...AI2 Synthesis System User s Guide Interactive Music Workstation iS35...
Страница 9: ...GETTING STARTED...
Страница 71: ...REFERENCE...
