
Reference •
Backing Sequence mode
101
** The KB MODE/ASSIGN parameter controls the
KEYBOARD ASSIGN and KEYBOARD MODE sec-
tions:
Step recording the real time track
1. Press EXIT/NO to get to Page 2 in the Backing
Sequence mode.
2. Select the KBTr track.
3. Press REC/WRITE/LYRICS and then START/
STOP. The following page will appear.
4. Move the cursor to the parameters you wish to
modify, using the CURSOR buttons, and change
the values using the TEMPO/VALUE buttons (or
the DIAL).
5. Select the step using the buttons with the notes (or
with the TEMPO/VALUE buttons (or the DIAL))
and play the note to be entered.
6. When finished, press START/STOP to go back to
Page 2 of the Backing Sequence mode.
7. To playback the new backing sequence, go back to
Page 1 and press START/STOP.
Note
This indicates the name of the most-recently entered
note. This parameter will appear if you have selected
track KBTr or ETr1–8.
M (Measure number)
Current measure.
Position
This indicates the position where the next event will be
entered. The number to the left of the colon (:) indi-
cates the beat within the measure. The number to the
right of the colon (:) indicates the position within the
beat, in 1/96th quarter note units.
Time signature
[1/4…16/16]
Initial time signature of the backing sequence. This
parameter will appear if you have selected track KBTr
or ETr1–8. To enter time signature changes during the
backing sequence go to “Page 8: Event edit” on
page 107.
Step
[
]
This specifies the length of the step by which you will
move forward each time a note is entered (or other
event). This will appear if you have selected KBTr or
ETr1–8 as the track. The value will be indicated by a
musical symbol. You can select any musical value from
(whole note) and (32nd note), including length-
ened (dotted) notes (.) and triplet notes (3).
You can select the step by using either the TEMPO/
VALUE buttons (or the DIAL) or the VARIATION,
FILL, INTRO/ENDING buttons.
Velocity
[002…126, KEY]
This indicates the strength (dynamics) of the note. If
the value is KEY, the velocity with which the note was
actually played will be input. This will only appear if
you have selected KBTr or ETr1–8 as the track.
Option
Keyboard Assign
Keyboard Mode
FUL-UP1
UPPER1
FULL
FUL UP1&2
UPPER1, UPPER2
FULL
SP UP1&L
UPPER1, LOWER
SPLIT
DRUM
---
DRUM
FUL-MUTE
---
FULL
FUL-UP2
UPPER2
FULL
SP-MUTE
---
SPLIT
SP-UP1
UPPER1
SPLIT
SP-UP2
UPPER2
SPLIT
SP-UP1&2
UPPER1, UPPER2
SPLIT
SP-LOW
LOWER
SPLIT
Note
Position
Metro
Step
Velocity
Duration
Measure
Содержание iS35
Страница 1: ...AI2 Synthesis System User s Guide Interactive Music Workstation iS35...
Страница 9: ...GETTING STARTED...
Страница 71: ...REFERENCE...