Reference •
Program mode
187
S (Key sync)
[ON, OFF]
This parameter specifies whether or not the VDF MG
will be reset each time you play a note.
With a setting of ON, the modulation waveform will
be reset each time you play a note.
With a setting of OFF, the modulation waveform of the
first-played note will continue at the standard fre-
quency, and will not be affected by subsequently-
played notes. We suggest that you set this OFF when
playing chords, so that modulation will apply to each
note in unison even if you arpeggiate the chord.
Oscillator
[OFF, OSC1, OSC2, BOTH]
This specifies the oscillator(s) to which VDF modula-
tion will apply. You may modulate the cutoff fre-
quency of OSC1 or OSC2 or both.
If this is turned OFF, VDF MG will also be off.
Page 15: VDF MG controller/VDA level
VDFMG (VDF MG controller)
• JS (Joystick down)
[00…99]
Specifies the maximum depth of modulation that will
be applied when you move the joystick away from
you.
This is similar to the “Page 14: VDF MG” Intensity
parameter, but in this case, the specified modulation
will not be applied until you move the joystick.
• Af (Aftertouch)
[00…99]
This specifies the maximum depth of the modulation
that will occur when aftertouch is applied.
This is similar to the “Page 14: VDF MG” Intensity
parameter, but in this case, the specified modulation
will not be applied until you apply aftertouch.
VDA Level
• Af (Aftertouch)
[–99…+99]
This specifies the volume change that will be con-
trolled by aftertouch.
Positive
(+) settings will cause the sound to become
louder as you press down on the keyboard, and higher
settings will allow a greater change in volume.
Negative
(–) settings will cause the sound to become
softer as you press down on the keyboard.
Joystick down
Aftertouch
Level with Aftertouch applied
Содержание iS35
Страница 1: ...AI2 Synthesis System User s Guide Interactive Music Workstation iS35...
Страница 9: ...GETTING STARTED...
Страница 71: ...REFERENCE...