Kikusui PFX2532, Руководство по эксплуатации

Страница: 84 / 142

84
PFX2532
PFX2532 Electric Specifications
Outline drawing
Unit mm (inches)
4 Pollution is addition of foreign matter (solid, liquid or gaseous) that may produce a reduction of dielectric
strength or surface resistivity. Pollution Degree 2 assumes that only non-conductive pollution will occur except
for an occasional temporary conductivity caused by condensation.
5 This is a Class A equipment. The PFX2532 is intended for use in an industrial environment. This product may
cause interference if used in residential areas. Such use must be avoided unless the user takes special measures
to reduce electromagnetic emissions to prevent interference to the reception of radio and television broadcasts.
6 This is a Group 1 equipment. The PFX2532 does not generate and/or use intentionally radio-frequency energy,
in the from of electromagnetic radiation, inductive and/or capacitive coupling, for the treatment of material or
inspection/analysis purpose.
7 Because the power cord does not comply with CE, it may not be included depending on the shipment
destination.
29.25 (1.15)
371 (14.61)
29.25 (1.15)
70 (2.76)
425 (16.73)
4-M3 screw holes
max. depth 8 mm
(0.31 inch)
550 (21.65)
MAX10
(0.39)
MAX600 (23.62)
429.5 (16.91)
128 (5.04)
MAX145 (5.71)