Kikusui PFX2532, Руководство по эксплуатации

Страница: 39 / 142

PFX2532
39
2
C
o
nnec
ting and C
o
nfiguring De
vic
e
s
Connecting the Electronic Load and Boosters
p. 23 , p. 28
Use the booster connection cables and parallel connection cables to connect the electronic load
and boosters. Booster connection cables and parallel connection cables are not included.
Consider the current that you will be using, and connect using the thickest and shortest available
wires. Use connection cables with the same length and cross-sectional area.
This section explains an example of connecting two Kikusui PLZ2405WB Electronic Load Boosters
using the PC01-PLZ-5W parallel operation signal cable kit.
For wiring precautions and other items to be considered, see the electronic load operation manual.
1
Check that all devices that you will connect are turned off.
p. 35
2
Connect the booster connection cables to the load input terminals on the rear
panel of the electronic load, and attach the terminal cover.
3
Using the load input terminal screws included with the booster, connect the
booster connection cable to the load input terminal of the booster.
4
Place the bottom half of the load input terminal cover underneath the
electronic load connection cables.
See
See
M12
+ +
í í
When there are
two load cables When there are
four load cables