Kikusui PFX2532, Руководство по эксплуатации

Страница: 34 / 142

34
PFX2532
Connecting to DC Power Supplies
Connecting the DC Power Supply Control Cable
1
Attach the included lock lever to the SC07-PFX I/F cable for the PWR-01.
Attach it to the connector on the side with the ferrite core.
If the lock lever is not attached, the connector may come off.
2
Check that all devices that you will connect are turned off.
3
Insert the included I/F cable for PAT-T into the DC POWER SUPPLY connector of
the PFX2532.
Insert the end with a ferrite core into the PFX2532.
Insert it securely using the lock lever. Check that it does not fall out.
4
Insert the other end of the I/F cable for PAT-T into the J1 connector of the DC
power supply.
Insert it securely, and check that it does not fall out.
Lock lever
Memo
If you reverse the cable
ends, it will not work.
I/F cable for PAT-T
PFX2532
Ferrite core