Kikusui PFX2532, Руководство по эксплуатации

Страница: 37 / 142

PFX2532
37
Connecting to the Electronic Load
2
C
o
nn
ec
ting
an
d C
o
nfigurin
g Devic
e
s
5
Align the tabs of the top cover for the load input terminals on the rear panel
with those of the bottom cover.
Align the tabs of the load input terminal cover according to the load cable diameter.
You can adjust the diameter of the holes that the load cables pass through by
changing the position that the top and bottom covers are put together. There are two
available positions. Use the appropriate position for the load cables that you are
using.
• For cables up to ø10 mm: Put the top and bottom load input terminal covers
together so that the hole diameter is small.
• For cables that are between ø10 and 20 mm: Put the top and bottom load input
terminal covers together so that the hole diameter is large.
6
Push the cover for the load input terminals on the rear panel against the
panel, and fasten it with the included screws.
Make sure that the screws are securely fastened.
)RUWKLQORDGFDEOHVXSWRĭ
)RUWKLFNORDGFDEOHVĭWRĭ
M3×18