Kikusui PFX2532, Руководство по эксплуатации

Страница: 52 / 142

52
PFX2532
Configuring the Electronic Load
Setting the master unit, slave units and the number of boosters
for parallel connection
On the PLZ-5W, the master unit, slave units, and the number of units are automatically set
according to the connection status.
On the PLZ-4W, follow the procedure below.
1
By the setting menu concerning to the master slave parallel operation, set the
following conditions respectively.
•Master unit: Menu > Configuration > Master/Slave > Operation : Master
•Slave unit: Menu > Configuration > Master/Slave > Operation : Slave
2
On the master unit, specify the connecting number of slave units.
•Two units: Menu > Configuration > Master/Slave > Parallel ： 2
3
From the menu, set the number of boosters you will connect.
• Number of boosters: Menu > Configuration > Master/Slave > booster : {1|2}
For details on the setup procedure, see the operation manual of the Electronic Load that you are
using.
Setting the Lock Function
Set the lock function.
For details on the setup procedure, see the operation manual of the Electronic Load that you are
using.
PLZ-5W Hold down KEY LOCK to lock or unlock. While the keys are locked, a key icon is shown in the
upper right of the display according to the key lock level.
PLZ-4W Hold down LOCK (SHIFT+LOCAL) to lock or unlock the panel. While the panel is locked, a key
icon is shown in the display.