Kikusui PFX2532, Руководство по эксплуатации

Страница: 26 / 142

26
PFX2532
Connecting the Power Cord
The PFX2532 conforms to IEC Overvoltage Category II (energy-consuming equipment that is
supplied from a fixed installation).
Connecting to the switchboard
■
Switchboard breaker requirements
• Rated current: 30 A (for safety, circuit breakers whose rated current exceeds 30 A cannot be
used)
• Only use the breaker with this PFX2532.
• Keep the breaker readily accessible at all times.
• Indicate that the circuit breaker is dedicated for use with this PFX2532 and that it is used to
disconnect the product from the AC power line.
WARNING
Risk of electric shock.
• The PFX2532 conforms to IEC Safety Class I (equipment that has a protective conductor
terminal). Be sure to earth ground the product to prevent electric shock.
• Before you connect the power cable, turn off the switchboard breaker (a switch that cuts off
the power supply from the switchboard).
Risk of electric shock or fire.
• Be sure to have a qualified engineer make the connection to the switchboard.
• For the connected switchboard, select a circuit breaker that has a cut-off current that can
handle the maximum input current of the PFX2532.
• The switchboard breaker must meet the requirements shown below.
CAUTION
Inside the PFX2532, protection circuits are connected to match the polarity of the input terminal.
Be sure to connect the L, N, and (GND) terminals correctly between the switchboard and the
PFX2532.
• Use the included power cord to connect to the AC line.
• In an emergency, turn off the switchboard breaker to separate the PFX2532 from the AC power
line.
• Risk of damage to test data and malfunction. To perform charge/discharge tests safely, connect
the power cords of each device to the same AC power line, and insert the plugs in the same type
of outlet.
PFX2532
Switch
board
N
L
N
L
Circuit breaker indication example
PFX2532 dedicated
30 A
Power cord
PFX2532 dedicated circuit breaker
Connection to a switchboard