Kikusui PFX2532, Руководство по эксплуатации

Страница: 128 / 142

128
PFX2532
Characteristics of Digital CC/CV Control
If a DUT other than a battery is connected, the CC/CV control may not work properly.
If there is no load (not connected) or if a battery with an abnormally high internal impedance is
connected, CV mode may not work properly.
Even in CV or CP mode, the connected DC power supplies and electronic loads run in CC mode. This
is because external devices are always running as current sources, so this is the correct behavior.
Pattern charge/discharge function (seamless charge/discharge
control)
You can perform seamless charge/discharge switching only using with DC power supplies and
electronic loads (without using bipolar power supplies or bidirectional power supplies). You can
reduce the current capacity of the power supply or the loss of the electronic load at the switch
point.
This supports the standard test patterns in which charging and discharging are performed
consecutively such as the test patterns that are described in the IEC standards. This is a useful
feature for the step operations that are required when you are simulating charge/discharge tests.
Traditional charge/discharge switching
Seamless charge/discharge switching
Charge
1 to 3 s
Charge
Discharge Discharge
Charge
Charge
0 A
1 to 3 s