Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
35
Tools Required
•
Phillips Screwdriver
1. Set the worksurface upside
down onto a soft protective
surface. Attach three leg sets to
worksurface bottom by aligning
legs to pre-drilled holes and
inserting eight #12 x 1” screws
per leg set (Figure 1 & 2).
2. Install casters on the bottom of
each leg by threading into holes
on the underside of each leg.
Locking casters on Tear Drop
table should be placed on the
two legs on the curved portion
of the worksurface (Figure 1).
Locking casters on Semi-Circle
table should be placed on the
two legs on the flat portion of the
worksurface (Figure 2).
3. Carefully turn the worksurface to
the upright position.
WorkZone
®
Mobil Tables - Tear Drop & Semi Circle
Assembly Instructions
Tools Required
Phillips Screwdriver
1. Set the worksurface upside down
onto a soft protective surface.
2. Install casters on the bottom of
each leg by threading into holes on
the underside of each leg. Locking
casters on Tear Drop table should be
placed on the two legs on the curved
portion of the worksurface (Figure 1).
Locking casters on Semi-Circle table
should be placed on the two legs on
the flat portion of the worksurface
(Figure 2).
3. Carefully turn the worksurface to
the upright position (Figure 1 & 2)
Attach
three leg sets to worksurface bottom
by aligning legs to pre-drilled holes
and inserting eight #12 x 1” screws
per leg set (Figure 1 & 2).
#12 x 1" screw
WorkZone Mobil Tables
Tear Drop & Semi-Circle
Assembly Instructions
Figure 1 - Tear Drop Worksurface
Figure 2 - Semi-Circle Worksurface
leg
leg
worksurface
worksurface
locking
caster
locking
caster
#12 x 1”
screw
#12 x 1”
screw
caster
caster
Figure 1 - Tear Drop Worksurface
Figure 2 - Semi - Circle Worksurface
#12 x 1" screw
