Keysight E8663D, Руководство пользователя

Страница: 85 / 358

Keysight E8357D/67D & E8663D PSG User’s Guide 71
Basic Operation
Using Data Storage Functions
Using Data Storage Functions
This section explains how to use the two forms of signal generator data
storage: the memory catalog and the instrument state register.
Using the Memory Catalog
The Memory Catalog is the signal generator’s interface for viewing, storing,
and saving files; it can be accessed through the signal generator’s front panel
or a remote controller. (For information on performing these tasks remotely,
see the Keysight Signal Generators Programming Guide .)
Storing Files to the Memory Catalog
To store a file to the memory catalog, first create a file. For this example, use
the default list sweep table.
1. Press Preset .
2. Press Sweep/List > Configure List Sweep > More (1 of 2) > Load/Store .
This opens the “Catalog of List Files”.
3. Press Store to File .
Table 2-1 Memory Catalog File Types and Associated Data
Binary binary data
State instrument state data (controlling instrument operating parameters,
such as frequency, amplitude, and mode)
LIST sweep data from the List Mode Values table including frequency,
amplitude, and dwell time
User Flatness user flatness calibration correction pair data (user–defined frequency
and corresponding amplitude correction values)
FIR Finite Impulse Response (FIR) filter coefficients
ARB Catalog Types (E8267D PSG with Option 601/602 only) user created files –
Waveform Catalog Types: WFM1 (waveform file),
NVARB Catalog Types:
NVWFM (non–volatile, ARB waveform file),
NVMKR (non–volatile, ARB waveform marker file),
Seq (ARB sequence file),
MTONE (ARB multitone file),
DMOD (ARB digital modulation file), MDMOD (ARB multicarrier digital
modulation file)
Modulation Catalog Types (E8267D PSG with Option 601/602 only) associated data for I/Q and
FSK (frequency shift keying) modulation files
Shape burst shape of a pulse
Bit Bit