Keysight E8663D, Руководство пользователя

Страница: 133 / 358

Keysight E8357D/67D & E8663D PSG User’s Guide 119
Basic Digital Operation
Using Waveform Markers
2. Highlight the desired waveform segment.
In an ARB format, there is only one file (
AUTOGEN_WAVEFORM
) and it is
already highlighted.
3. Highlight the desired marker number:
Press
Marker 1 2 3 4
4. Set the first sample point in the range (in this example, 10):
Press
Set Marker On Range Of Points > First Mkr Point > 10 > Enter .
5. Set the last marker point in the range to a value less than or equal to the
number of points in the waveform, and greater than or equal to the first
marker point (in this example, 20):
Press
Last Mkr Point > 20 > Enter .
6. Press Apply To Waveform > Return .
This sets a range of waveform marker points. The marker signal starts on
sample point 10, and ends on sample point 20, as shown in the following
figure.
Placing a Marker on a Single Point
On the First Point
1. In the Marker Utilities menu ( page 115 ), press Set Markers .
2. Highlight the desired waveform segment.
In an ARB format, there is only one file (
AUTOGEN_WAVEFORM
) and it is
already highlighted.
3. Highlight the desired marker number:
Press
Marker 1 2 3 4
4. Press Set Marker On First Point .
This sets a marker on the first point in the segment for the marker number
selected in step 3 .
On Any Point
Viewing markers is described on
page 116