KEPCO BOP 1000W, Руководство оператора

Страница: 87 / 188

BOP HIPWR 080709
3-23
If Protection type was saved as External, EXT is listed under the Prot heading. In this case the
protection settings are determined by the levels applied to the appropriate pins of the Analog I/O
Input Port (see Table 2-10). If the main channel is voltage, the protection settings are deter-
mined by pin 5 (negative current protection) and pin 13 (positive current protection). If the main
channel is current, the protection settings are determined by pin 6 (negative voltage protection)
and pin 14 (positive voltage protection).
FIGURE 3-8. SAVED SETUPS MENU
3.3.8.2 VIEWING SAVED SETTINGS
1. Pressing
!
from the power-up screen displays the Saved Setups screen (Figure 3-8) con-
sisting of a list of locations 1 through 20 arranged in two columns of 10 rows. Use
T
and
R
keys to display additional columns. NOTE: Use the number keys as a shortcut, e.g., press-
ing
4 immediately highlights location 41, showing the column with locations 41 through 50.
2. Use the
U
and
Y
keys to highlight the desired memory location; When the desired location
is highlighted, press
!
. The details of the parameters listed in Table 3-8 are displayed.
3.3.8.3 SAVING SETTINGS AND ERASING OR MODIFYING PREVIOUSLY SAVED SETTINGS
1. Press
!
from the power-up screen to enter the Saved Setups screen (Figure 3-8).
2. Use the
U
and
Y
keys to highlight the desired memory location; To erase a highlighted
memory location, press
#
. The list will show erased locations as Empty .
3. Press
!
to see the details stored in the highlighted location.
4. Once the details are displayed, use the
U
and
Y
keys to highlight the desired parameter.