![background image](http://html1.mh-extra.com/html/keithley/dda-08/dda-08_user-manual_661637052.webp)
4-1
4
Cabling and Wiring
This section describes how to attach accessory boards to a DDA-08/16
board and provides valuable information for connecting signals from a
DDA-08/16 board.
Caution:
Before you make any connections to a DDA-08/16 board, make
sure that power to your computer and any accessories attached to the
DDA-08/16 board are OFF.
Attaching Accessory Boards
You can use the following accessory boards to connect signals from the
DDA-08/16 board to your application:
●
STC-37 screw terminal connector
●
STA-U screw terminal accessory
●
STP-37 screw terminal panel
You attach an STC-37, an STA-U, or an STP-37 to a DDA-08/16 board
through the main I/O connector, a 37-pin, D-type connector that is labeled
J5 on the board. The main I/O connector and its pin assignments on a
DDA-16 board are shown in Figure 4-1. (The pin assignments on a
DDA-08 board are the same as the pin assignments on a DDA-16 except
that pins 12 through 19 and pins 30 through 37 are not used.) Refer to
Appendix B for a more detailed description of the pins.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com