![background image](http://html1.mh-extra.com/html/keithley/dda-08/dda-08_user-manual_661637046.webp)
3-15
Note:
The DriverLINX default analog output range for each quad DAC
in the DriverLINX configuration file is 0 to 10V (indicating voltage
output). Make sure you note the switch settings on the board so that you
can program the DriverLINX configuration to match.
The locations of the output signal switches on a DDA-08/16 board are
shown in Figure 3-1.
Find the four switches for the appropriate quad DAC. Slide the switch to
the left for voltage output; slide the switch to the right for current output.
Figure 3-3 illustrates the settings for voltage output.
Figure 3-3. Setting the Output Signal
Setting the Output Range Type
DDA-08/16 boards are shipped with the output range type for all quad
DACs set to unipolar/current. If this is not appropriate for your
application, you can reconfigure the output range type for a quad DAC
using the 2-position output range type switch.
The output range type switches are labeled as shown in Table 3-5. Note
that the DDA-08 board does not contain the output range type switches
for quad DAC2 and quad DAC3.
Voltage Output
Current Output
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com