![background image](http://html1.mh-extra.com/html/keithley/dda-08/dda-08_user-manual_661637016.webp)
1-3
●
DDA-08/16 Utilities
— The following utilities are provided as part of
the DDA-08/16 standard software package:
●
Calibrate and Test Utility — allows you to select a device to test
and calibrate.
●
DriverLINX Test Panel — allows you to perform a limited
number of tests.
Note:
The DDA-08/16 board is calibrated at the factory for
voltage
mode
. If the board is to be used in
current mode
, it needs to be
recalibrated.
Accessories
The following accessories are available for use with DDA-08/16 boards:
●
STC-37 screw terminal connector
— Provides 37 screw terminals
that allow you to access the functions of the board; connects directly
to the DDA-08/16 board without a cable.
●
STA-U screw terminal accessory
— Provides 37 screw terminals
that allow you to access the functions of the board; provides a
breadboard area with power and additional screw terminals to access
the user-designed circuitry.
●
STP-37 screw terminal panel
— Provides 37 screw terminals that
allow you to access the functions of the board; available with a plastic
case (STP-37/C) that you can mount in a standard DIN rail.
●
C-1800 cable
— Unshielded, 18-inch cable with a 37-pin connector
on each end; allows you to connect a DDA-08/16 board to an STA-U
or STP-37. (Note that the C-1800 cable is also available in longer
lengths, if required.)
●
S-1800 cable
— Shielded, 18-inch cable with a 37-pin connector on
each end; allows you to connect a DDA-08/16 board to an STA-U or
STP-37. (Note that the S-1800 cable is also available in longer
lengths, if required.)
Refer to Keithley’s
Products catalog or contact your local sales office for
information on obtaining these accessories.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com