![background image](http://html1.mh-extra.com/html/keithley/dda-08/dda-08_user-manual_661637050.webp)
3-19
Configuring DriverLINX
After you have successfully installed the DDA-08/16 board in your
computer, start Windows to install DriverLINX. For detailed instructions
on installing DriverLINX, see the documentation provided on the
DriverLINX CD-ROM; especially refer to DriverLINX Installation and
Configuration Guide and Using DriverLINX with Your Hardware,
Keithley DDA-08/16 manuals.
Note:
Be sure to note and follow differences in programming between
Windows NT and Windows 95/98 as appropriate for your system.
Run “Learn DriverLINX” (LearnDL.exe) from the DriverLINX program
group to tell DriverLINX how you configured your DDA-08/16 board and
to verify that everything is properly installed and configured.
1. Start Windows as you normally would and select the Program
Manager window. Install DriverLINX if you have not previously
done so.
2. Either select the “Learn DriverLINX” icon created when you
installed DriverLINX or enter “<drive?:/DRVLNX/LEARNDL” in
the Command Line edit box. Activate the command line edit box by
selecting the Run... option from the File menu. <drive> is the letter of
the hard disk drive where DriverLINX is installed.
3. Immediately after loading Learn DL, the Open DriverLINX DLL
dialog box appears. Select the name of the hardware-specific DLL
from the list for your DDA-08/16 board. The name is an abbreviation
of the board’s model number.
4. From the main menu bar of Learn DL, select the Device menu and
choose Select....
5. Select the Logical Device you wish to configure and then click on the
OK button (return).
6. Again select the Device menu and then choose the Configure... option
to display the Device Configuration Dialog Box.
7. From the Model list, select the model name for the DDA-08/16 board
you are configuring.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com