![background image](http://html1.mh-extra.com/html/keithley/dda-08/dda-08_user-manual_661637062.webp)
5-4
Subsystems and Analog I/O
The Analog I/O Panel is useful for:
●
Testing the DDA-08/16 DriverLINX installation and configuration.
●
Verifying signal inputs to your DDA-08/16 board.
●
Sending test signals to external devices.
To access this DriverLINX Analog I/O Panel:
1. Start the Analog I/O Panel with the “AIO Panel” item on the Windows
start menu, and continue with the following steps:
2. Click the [...] button in the Driver Selection section.
3. Select the driver for your board using the
Open DriverLINX
dialog.
4. Click
OK.
5. Select the Logical Device you want to operate by dragging the pointer
in the Device Selection section. The Analog I/O Panel displays the
Scope, Meter, SST, and Level control tabs, depending on the
capabilities of your DDA-08/16 board.
6. The Scope uses two analog input channels, referred to as ChA and
ChB. Drag the channel selectors in the AI Channel Mapping section
to map them to different channel numbers.
7. The SST Signal Generator uses two analog output channels, referred
to as ChA and ChB. Drag the channel selectors in the AO Channel
Mapping section to map them to different channel numbers.
You can now select the Scope, Meter, SST, and Level Control tabs to
operate your DDA-08/16 board.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com