![background image](http://html1.mh-extra.com/html/keithley/dda-08/dda-08_user-manual_661637090.webp)
X-5
S
S-1800 cable 1-3, 4-4, 4-5
screw terminal accessory
required for calibration 6-2
shipping instructions
for returning material 7-8
signal generator
in analog I/O panel 5-3
signals
connecting 4-6
simultaneous update 2-3
single-value output
in analog output 5-3
slot size 3-18
specifications A-1
start
analog output operation 5-2
status
analog output operation 5-2
STA-U screw terminal accessory 1-3
attaching 4-4
STC-37 screw terminal connector 1-3
attaching 4-3
stop
analog output operation 5-2
STP-37 screw terminal panel 1-3
attaching 4-5
switches 3-8, 3-9
base address 3-10
current output 3-15, 3-17
output range type 3-15
output signal 3-14
output span 3-17
setting output range 3-13
setting prior to installation 3-4
synchronizing devices 2-8
T
technical support
instructions for using 7-6
test button
on test panel in DriverLINX 6-6
test panel
in DriverLINX 5-5
test setup
in DriverLINX 6-6
TestPoint
application program 1-2
time delay (output clock) 2-8
timing event
analog output 5-3
digital input 5-1
used to pace output 2-11
trigger 2-11, 2-12
related to analog output samples 2-9
troubleshooting 7-3
U
unipolar output, selecting 3-15
unpacking a board 3-1
update clock:
see
pacer clocks
update group 2-3
update rate 2-6, 2-8
updating analog output channels 2-3
utilities
calibration and test 6-1
description 1-3
DriverLINX Test Panel
description 1-3
included in standard software package
1-3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com