![background image](http://html1.mh-extra.com/html/keithley/dda-08/dda-08_user-manual_661637039.webp)
3-8
Setup and Installation
Setting Switches on the Board
Figure 3-1 illustrates the location of the switches on a DDA-16 board.
Note that the switches on a DDA-08 board are the same as the switches on
the DDA-16 except that the DDA-08 board does not contain the output
signal switches for quad DAC2 and quad DAC3, the output range type
switches for quad DAC2 and quad DAC3, or the output span switches for
quad DAC2 and quad DAC3.
Refer to the following subsections for information on setting these
switches.
Note:
If switches on the board are changed after the software has been
installed, the software will need to be reconfigured.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com