![background image](http://html2.mh-extra.com/html/keithley/6514/6514_instruction-manual_4064199040.webp)
Measurement Concepts
2-3
SCPI programming
Programming example
The following command sequence will perform one zero corrected amps measurement:
SYST:AZER OFF
‘ Disable autozero.
SYST:AZER ON
‘ Enable autozero.
Connection fundamentals
The following provides important fundamental information on input connections to Model
6514. Typical connection drawings are included with the various measurement procedures pro-
vided in subsequent sections of this manual.
Input connector
The rear panel INPUT connector is a 3-lug female triax connector that will mate to a cable
terminated with a male triax connector.
Table 2-2
SCPI commands — autozero
Command
Description
Default
SYSTem
SYSTem Subsystem:
:AZERo
[:STATe] <b>
Enable or disable autozero.
ON
Содержание 6514
