12-2
Common Commands
Model 2750 Multimeter/Switch System User’s Manual
Common commands (summarized in
) are device commands that are common
to all devices on the bus. These commands are designated and defined by the IEEE-488.2
standard.
Table 12-1
IEEE-488.2 common commands and queries
Mnemonic
Name
Description
Ref
*CLS
Clear status
Clears all event registers and error queue.
*ESE <NRf> Event enable command
Program the standard event enable register.
*ESE?
Event enable query
Read the standard event enable register.
*ESR?
Event status register query
Read the standard event enable register and
clear it.
*IDN?
Identification query
Returns the manufacturer, model number, serial
number, and firmware revision levels of the
unit.
A
*OPC
Operation complete command Set the operation complete bit in the standard
event register after all pending commands
have been executed.
B
*OPC?
Operation complete query
Places an ASCII “1” into the output queue when
all pending selected device operations have
been completed.
B
*OPT?
Option query
Returns the model numbers of the switching
modules installed in the Model 2750. Returns
“NONE” if a slot is empty.
C
*RCL <NRf> Recall command
Returns Model 2750 to the user-saved setup (0,
1, or 2).
D
*RST
Reset command
Returns Model 2750 to the *RST default
conditions.
E
*SAV <NRf> Save command
Saves the present setup as the user-saved setup
(0, 1, or 2).
D
*SRE <NRf> Service request enable
command
Programs the service request enable register.
*SRE?
Service request enable query
Reads the service request enable register.
*STB?
Status byte query
Reads the status byte register.
*TRG
Trigger command
Sends a bus trigger to Model 2750.
F
*TST?
Self-test query
Performs a checksum test on ROM and returns
the result.
G
*WAI
Wait-to-continue command
Wait until all previous commands are executed.
H
2750-900-01.book Page 2 Wednesday, August 3, 2011 7:56 AM
Содержание 2750
