KaVo ORTHOPANTOMOGRAPH OP 3D Pro, Руководство по обслуживанию, Страница: 119 / 192

6 The s2terminal and service functions
111
6.4 Unit service commands
The unit service commands allow the operation of the unit
to be checked and configured.
1. Key in
service
and press
ENTER
.
------------------------------------------------------------------
------------------------------------------------------------------
The unit enters and activates the service state.
Note! The unit can only enter the service state from the idle
or error states.
2. Key in
help
and then press
ENTER
.
------------------------------------------------------------------
------------------------------------------------------------------
A list of unit service commands will appear.
------------------------------------------------------------------
service
help
calset
Forces the calibration programs to be
marked as done or undone.
cephstatus
Displays status of all ceph optos, micro
switches and encoders.
cephgetraw
Requests raw image frames from ceph
CPU.
cancel
Bypasses initializations on startup.
cephimagingdir
Sets ceph imaging direction.
clients
Displays connected client
applications.
conf
Displays configuration parameters.
copperthickness
Tells unit about changed copper thick-
ness
counter
Displays the number of exposures taken.
dapcalib
Not currently available. Use command
doserate instead
datatxdelay
Sets packet delay on image transfer.
demomode
Sets the unit to demonstration mode.
drivemotor
Drives the selected motor to desired posi-
tion.
doserate
Configures doserate compensation
endstudy
If enabled, ends the patient study after ex-
posure
help
Lists service commands/gives detailed
help (help [command])
indicator
Sets or clears service/QA reminder mes-
sages or period.
ip
Configures the IP address of the external
Ethernet interface.