Kathrein UFS 923, Руководство по эксплуатации

Страница: 94 / 148

94
Error rate
Press the

buttons to select the applicable error rate (Viterbi rate). When searching for DVB S(SD)
transponders, you need not state the error rate. “Automatic” will appear permanently instead. When search-
ing for DVB S2(HD) transponders, you must state the correct error rate. Either QPSK 1/2, 2/3, 3/4, 3/5, 4/5,
5/6, 8/9, 9/10 or 8PSK 2/3, 3/4, 3/5, 5/6, 8/9 or 9/10.
Polarisation
Press the

buttons to select the correct polarisation (horizontal or vertical)
Symbol rate
Use the number pad to enter the corresponding symbol rate.
Channel search mode
Use the

buttons to select the type of channels you want to search for. You have three options:
- “free & scrambled” All channels are searched for.
- “only free” Only free-to-air channels are searched for.
- “only scrambled” Only encrypted channels are searched for
To view encrypted channels, you need an appropriate CA (Conditional Access) module and a valid
smart card together with a valid subscription to the relevant pay TV provider.
Network scan
Use the

buttons (On/Off) to select whether a network scan should be performed. If you set the
network scan to “Off”, only the factory set transponders for the satellite(s) you previously selected will be
scanned for new and as yet unlisted channels. If you set the network scan to “On”, the transponder network
enables additional transponders that have not yet been stored to be located. These are then stored and
searched through for new channels like with the existing transponders. Once you have made all the settings,
use the

buttons to switch to the “Start Search” selection fi eld and press the

button to con fi rm
you want to start searching.
The following on-screen displays that appear during and following the search are identical to those for an
automatic search.
Main menu - Channel search
You can cancel the search at any
time by pressing the

button.