Kathrein UFS 923, Руководство по эксплуатации

Страница: 100 / 148

100
Software update via satellite
Main menu - Service menu
After calling up the menu, you will fi rst see
the following on-screen display:
All available modules/components
for your receiver will be loaded and
then displayed.
The loading process may take
up to 60 minutes
The following on-screen display will then
appear:
Use the

buttons to select the
parameters to be updated during the
update procedure.
x.xx
Displaying the info text
Press the

button to display the info text for the available downloads. This indicates the main features
of the new operating software, on the basis of which you can decide whether you want to install the new
software on your receiver.
Updating the software
Select “Yes” here if you want to install new software; select “No” if you are satis fi ed with your old software
version and the changes in the new software are not relevant to you.
Updating the channel list
Select “Yes” here if you want to install the new channel list or “No” if you want to retain your old channel list.
Prior to doing this, you can also save your old channel list via “Software Update by USB”, “Save channel list
on a USB device” however, so that if you do not like the new channel list you can revert back to the old one.
If a new channel list is loaded, this will be automatically regenerated after each factory reset (Factory Reset)
(see “Service menu”, “Factory Reset”, “Reset Channel List”).