Kathrein UFS 923, Руководство по эксплуатации

Страница: 86 / 148

86
Main menu - Edit channel list
tvtv on/off
You can use this function only if Premium tvtv EPG data is available for the selected channel.
Using the

buttons, select “Switch off tvtv” or “Switch on tvtv”.
Depending on whether support by the Premium tvtv EPG is activated or deactivated, you can now switch
support on or off by con fi rming with the

button.
Because of the large amount of data
being transmitted, the receiver can-
not store all data for the channels
supported by the EPG. The receiver
con
fi guration is therefore factory-set
to accept tvtv data for only a limited
number of channels.
You can tell which channels support is acti-
vated (on) for by the blue and red tvtv logo.
Channels for which support is not activated
are recognisable by the logo being greyed
out (see screenshots on right).
tvtv support on
tvtv support off
If several channels use the same tvtv data, the following warning message is dis-
played when you deactivate the function:
“The tvtv data is used for several channels”.
In this case, no tvtv data is stored for the other affected channels.
For example: If you activate support for RTL 2 CH, no additional data is loaded for RTL 2 and
RT L2 Austria.
Make this setting for your desired channels. For better orientation, you can display a channel list in the
category “Complete list/Satellite lists” (green) which shows only those channels supported by Premium tvtv
EPG. Selection of the tvtv list in the category “Satellite lists” is performed using the

buttons.
This setting can be changed at any time you like.