manualshive.com logo in svg

Kathrein UFS 923, Руководство по эксплуатации

Поделиться
Скачать
Kathrein UFS 923 Скачать руководство пользователя страница 45

45

Electronic Programme Guide (EPG)

   Daily:

The recording will be made daily at a time speci-

fi

 ed by you.

Weekly:

The recording will be made once a week on the 
same day and at the same time.

Special instructions:

Remember that the day of the week for the 
desired programme is loaded in the record-
ing schedule and you can make no further 
manual corrections to this!

Before pressing the 

 button therefore, 

select the programme on the day on which 
you wish to make the weekly recording in 
future.

User-de

fi

 ned:

The recording will be performed on days speci

fi

 ed 

by you at times speci

fi

 ed by you.

Special instructions:

In some cases the receiver will suggest 
some days to you; you can accept these 
suggestions or deactivate them using the 

cursor buttons and by pressing the 

 

button.

Содержание UFS 923





















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды