Kathrein UFS 923, Руководство по эксплуатации

Страница: 119 / 148

119
Main Menu - Settings
Frequency
Use the

buttons (transponder frequency already stored) or the number pad (transponder frequency
not yet stored) to select the transponder frequency to be tested. At the bottom right of the on-screen display,
the receiver shows the current signal strength and signal quality of the selected transponder.
The “DVB Type”, “FEC”, “Polarisation” and “Symbol Rate” options only need to be speci fi ed if the
transponder is yet to be stored.
DVB type
Here you select whether standard channels (DVB-S (SD)) or HDTV channels (DVB-S2 (HDTV)) are to be
received from the desired transponder.
FEC
Select the applicable error rate (Viterbi rate). You need not state the error rate for DVB S(SD) transponders.
“Automatic” will appear permanently instead. You must state the correct error rate for the DVB S2 (HD) tran-
sponders. Either QPSK 1/2, 2/3, 3/4, 3/5, 4/5, 5/6, 8/9, 9/10 or 8PSK 2/3, 3/4, 3/5, 5/6, 8/9 or 9/10.
Polarisation
Select the correct polarisation (horizontal or vertical) here.
Symbol rate
Use the number pad to enter the corresponding symbol rate.
Tuner Con fi guration
Only make changes if you are very familiar with the con fi guration of your satellite
receiver! If you are not familiar with the con fi guration of your satellite receiver, you
should get in contact with your specialist dealer.
For details on how to make tuner con fi guration settings, see the part 1 of the operating manual “Connection
and Start-up” “First Installation”.
You cannot select the individual menus during setting via the main menu using the

(green) button but
rather have to call these up manually using the

button.