110
Main Menu - Settings
Remote Control Code
After calling up the menu, you will see the
following on-screen display:
You can use this function to allow
you to operate several receivers
(e.g. four UFS 923 units) using the
same remote control. You can assign
each receiver its own remote control
code. This pre-supposes that the
receiver has been supplied with the
RC 670 remote control (e.g. UFS 923)
or with the RC 660 remote control
(e.g. UFS 10).
You can now use the remote control for your receiver to set a new remote control code (the remote control
code 1 is set as standard). Press the following buttons simultaneously:
-
+
+
for remote control code 1
-
+
+
for remote control code 2
-
+
+
for remote control code 3
-
+
+
for remote control code 4
Now press the
button. If the receiver does not close the on-screen display, the receiver and the remote
control have not set the same remote control code. Check your setting again.
To set the remote control for whichever remote control code is required in future, proceed as follows:
-
+
for remote control code 1
-
+
for remote control code 2
-
+
for remote control code 3
-
+
for remote control code 4
Содержание UFS 923
Страница 145: ...145 For your notes ...
Страница 146: ...146 For your notes ...
Страница 147: ...147 For your notes ...
