55
Appendix
Vedlegg:
Anhang
Troubleshooting
Oppretting av feil
Fehlerbehebung
16
Anhang
16.1 Fehlerbehebung
16
Appendix
16.1 Troubleshooting
Symptom/ Symptom/ Symptom
Bildtrübung/
Image unclear/
Uklart bilde
Möglicher Grund:
Distale Objektivlinse
beschlagen.
Lösung:
Linse spülen.
Möglicher Grund:
Verschmutze Linse.
Lösung:
Flexibles CMOS Video-Cysto-Urethroskop
ausstecken und distale Linse mit einem
Wattestäbchen mit Alkohol reinigen.
Möglicher Grund:
Linse durch Wasser
beschädigt.
Lösung:
Flexibles CMOS Video-Cysto-Urethroskop
zur Reparatur an KARL STORZ senden.
Possible reason:
Distal objective lens fogged.
Solution:
Rinse lens.
Possible reason:
Dirty lens.
Solution:
Withdraw flexible CMOS Video-Cysto-
Urethroscope and clean distal lens with cotton tip
applicator and alcohol.
Possible reason:
Lens water-damaged.
Solution:
Send flexible CMOS Video-Cysto-
Urethroscope to KARL STORZ for repair.
Mulig årsak:
Dugg på distal objektivlinse.
Løsning:
Spyl linsen.
Mulig årsak:
Tilsmusset linse.
Løsning:
Koble fra det fleksible CMOS video-
cysto-uretroskopet og rengjør den distale linsen
med en bomullspinne dyppet i alkohol.
Mulig årsak:
Linsen er skadet av vann.
Løsning:
Send det fleksible CMOS video-cysto-
uretroskopet til KARL STORZ for reparasjon.
Unzureichende Beleuchtung/
Inadequate lighting/
Utilstrekkelig belysning
Möglicher Grund:
Lichtübertragende Fasern
beschädigt.
Lösung:
Flexibles CMOS Video-Cysto-Urethroskop
zur Reparatur an KARL STORZ senden.
Possible reason:
Light conducting fibers
damaged.
Solution:
Send flexible CMOS Video-Cysto-
Urethroscope to KARL STORZ for repair.
Mulig årsak
: Lysoverførende fibre er skadet.
Løsning:
Send det fleksible CMOS video-cysto-
uretroskopet til KARL STORZ for reparasjon.
Beleuchtung funktioniert nicht/
Light does not function/
Belysningen fungerer ikke
Möglicher Grund:
Nicht am Monitor
angeschlossen.
Lösung:
Verbindung zum Monitor herstellen.
Possible reason:
Not connected to monitor.
Solution:
Connect to monitor.
Mulig årsak:
Ikke koblet til på monitoren.
Løsning:
Opprett forbindelse til monitoren.
Gerät ganz ausgefallen. Eventuell
Aufleuchten der Status-Anzeige /
Complete failure of the unit.
Possible lighting up of status
display /
Total apparatsvikt.
Statusindikatoren lyser muligens
Mögliche Ursachen:
Netzversorgung ausgefallen.
Lösung:
Versorgungsnetz überprüfen.
Mögliche Ursachen:
Unzureichende Verbindung
Netzgeräte stecker–Gerätebuchse.
Lösung:
Netzgerätestecker fest in Gerätebuchse
eindrücken.
Mögliche Ursachen:
Systemfehler.
Lösung:
Reset durchführen (siehe Seite 36).
Possible reason:
No power from power line.
Solution:
Check the electrical supply.
Possible reason:
Power cord connector is not
properly connected to power cord receptacle.
Solution:
Push power cord connector firmly into
the power cord receptacle.
Possible reason:
System error.
Solution:
Carry out reset (see page 36).
Mulige årsaker:
Brudd på strømforsyningen.
Løsning
: Kontroller strømnettet.
Mulige årsaker
: Utilstrekkelig forbindelse mellom
strømplugg og stikkontakt.
Løsning
: Sett strømpluggen godt inn i
stikkontakten.
Mulige årsaker:
Systemfeil.
Løsning:
Gjennomfør en tilbakestilling (se side 36).
16
Vedlegg:
16.1
Oppretting av feil