Kamstrup MULTICAL 602, Техническое описание, Страница: 121 / 130

MULTICAL® 602
Kamstrup A/S ∙ Technical Description ∙ 5512 ‐ 931_N1_GB_11.2016 121
13.3 LogView HCW
13.3.1 Introduction and installation
Regarding ”Introduction”, ”Interface” and ”Installation” see paragraph 13.1 Introduction METERTOOL HCW since
it is similar for LogView HCW.
13.3.2 General information
”LogView HCW” is used for read-out of logging data from MULTICAL

602 calculator and top modules (e.g. hourly
data) as well as interval logging. The read out data can be used for analysis and diagnostic test of the heating
installation. Data can be presented as table and graphics, tables can be exported to ”Windows Office Excel”
(ordering no. 6699-725).
For available logging data see paragraph 6.13 Data loggers.
13.3.3 ”Log”
Select the required data function.
Interval Data allows interval reading of current MULTICAL

602 counts at optional intervals between 1 and 1440 minutes
as well as an optional number of repetitions of the reading
between 1 and 9999 times.
For read-out of ”current” counts, enter interval: 1 and
repetition: 1. Thereby you obtain one ”instantaneous”
reading.
Daily Data, Monthly Data and Yearly Data allow read-out of
data logged by MULTICAL

602, with optional data period and
values.
Info Data allows read-out of the latest 50 info events from MULTICAL

602, reading includes date and info code of
the info event.
13.3.4 ”Top Module Log”
This function makes it possible to read out logging data, which have been logged by and stored in a top module.
This will mainly be read-out of e.g. ”Hourly Logging Data”. For other possibilities see paragraph 10.1.1 Top modules.
13.3.5 ”Bottom Module Log”
Is used for reading of logger data collected in base modules.
13.3.6 Help button
Contact The contact button gives you the links to Kamstrup’s website and mailbox.
Output
This function shows the latest functions used in the program.
User manual Links to the user manual for the meter on Kamstrup’s website.
13.3.7 About button
Lists the LogViews program version and revision numbers
as well as all sub-programs, their type numbers and revision
numbers for the entire LogView HCW program.