
Full Digital Color Doppler Ultrasonic Diagnostic Instrument (Vet) User’s Manual V1.00
- 71 -
Figure 3. Network Setting on “Line to the network”
7. After the setting is complete, move the cursor to select “Verify Settings” button marked on the LAN
Server Set, press
『
Set
』
key, it will pop up success prompt box, press
「
OK
」
in the prompt box, the LAN
server set is successful, the icon at the lower right corner of the screen will changed from
to
, it
indicates that the network is successful, you can achieve the network printing function. If prompt
fails, please check the IP address and TCP port, as well as the network cable is properly connected.
8. In the Measure menu, select the corresponding measurement report, press
〖
Print Report
〗
, you can
print out various examnine diagnositc report.
9. Freeze the current interface, press
key to enter ultrasound report interface. Open the file in the D
disk or U disk, press
〖
Print report
〗
button, a variety of ultrasound reports saved in the D disk or U disk
will be printed out.
10. Freeze the current interface, press
key to enter image management interface. Open the file in the
D disk or U disk, press
〖
〗
button, the images or reports saved in the D disk or U disk will be
printed out.
Note: In the “Line to the network” way, the computer connects to the Internet network.
Description: the specific use of Network Printer sees its instructions for use.
Attention:
1. Some network anomalies cause a timeout for a long time, especially unplug the network
cable in the phase of connecting and printing, need to wait several minutes to tens of
minutes, so recommend the user not to do network anomalies operation.
2. During the network printing, do not close the
software.
3. Make sure the printer connected to the system normally, the printer has papers and the
printer’s work status is normal.
Warning
:
1. It is forbidden to unplug the printer data cable in the case of without shutting down the
system’s power switch and printer’s power switch; or it may cause the system or printer
damage or electrical shock.
2. It is forbidden to unplug the printer’s power plug in the case of without shutting down
the printer’s power switch;
or it may cause the printer damage or electrical shock.