Kaixin DCU12 Скачать руководство пользователя страница 39

Страница: 39 / 87

Full Digital Color Doppler Ultrasonic Diagnostic Instrument (Vet) User’s Manual V1.00

- 31 -

Chapter Twelve Synopsis of Measurement Menu

12.1 Measurement menu categories

Measurement menu is divided into five cateories: B image measurement, CFM image measurement,

PDI image measurement, M image measurement and PW image measurement.

1. Six kinds of measurement menu in B image, CFM image and PDI image

(1) B general measurement menu: Can measure distance, circumference/area, volume, angle,

histogram, profile, distance/area stenosis ratio, ratio and depth, etc.

(2) B abdomen measurement menu: Can get abdominal report by measuring the data of left liver

lobe, right liver lobe maximum oblique diameter, caudate lobe thickness, hepatic portal vein,

gallbladder volume, cystic duct diameter, extrahepatic bile ducts diameter, intrahepatic bile

duct diameter, splenic length, splenic width, splenic thickness, splenic vein, the thickenss of

pancreas head, the thickenss of pancreas neck, the thickenss of pancreas body, the thickenss of

pancreas tail.

(3) B obstetric measurement: can measure and calculate gestational week, estimated delivery date

of bovine, canine, equine, feline, goat, llama, ovine and swine, and can get obstetric report.

(4) B cardiac measurement menu: Can get cardiac report by measuring the data of the left

ventricular function (single plane ellipse, double plane ellipse, bullet volume, modified

Simpson), right ventricle internal diameter, main pulmonary artery and key in (heart rate,

ejection time, height and weight).

(5) B urology measurement menu: Can get urinary report by measuring the prostate volume,

seminal vesicle, bladder volume, kidney cross-sectional area, kidney volume, renal cortical

thickness, residual urine volume.

(6) B superficial organs measurement menu: Can get superficial organs report by measuring the left

lobe volume, right lobe volume, isthmus thickness, left gland/right gland thickness, left

papillae/right papillae duct, testis volume.

2. Two kinds of measurement menu in M image

(1) M general measurement menu: Can measure the depth, slope, heart rate, time and ratio;

(2) M cardiac measurement menu: Can generate cardiac report by measuring the parameters of the

LV function, Mitral valve (EFSLP, AC descending speed, CA/CE and QMV), Aorta

(LAD/AOD, QMV), CO, Ejection Time, Left Ventricle Muscle Weight and key in (heart rate,

ejection time, height and weight).

3. Measurement menu in PW image

Attention:

1. During the measurement process, if switch the exam mode or probe, all the measurements and

marks in the image will be cleared.

2. Turn off the system or start “New Patient” when performing measurements, all unsaved data

will be lost.

3. When performing the measurements of Doppler blood flow, the direction of probe is not

perpendicular to flow direction, otherwise will not get the correct blood information and
affect the diagnosis.

Содержание DCU12
























































































Результаты поиска

Содержание DCU12

Отзывы:

Kaixin DCU12, Руководство пользователя, Страница: 39 / 87

Результаты поиска

Содержание DCU12

Отзывы: