Full Digital Color Doppler Ultrasonic Diagnostic Instrument (Vet) User’s Manual V1.00
- 64 -
Export: Images, reports or videos in the folder of D disk are saved to the folder with same name
in the U disk;
Print: Print the selected image or report;
the printing operation method refers to the
Chapter
twenty-one “Print and
Transfer files”
;
Dicom: The images or reports in the D disk or U disk are sent to DICOM server;
Exit: To exit the image management work interface.
19.3 Formats of image files
The system supports the following file format:
1. BMP format
Single frame image file format, used to save the current image, which is uncompressed format.
2. PNG format
Single frame image file format, used to save the current image, which is compression format.
3. AVI format
Multi-frame image file format, used to save the current video.
4. RPT format
Report format, used to save the current measured report.
5. DCM format
DICOM standard file format, single-frame format, used to record the patient information and images;
users can only review DCM file on the DICOM server.
19.4 Review, demo image/video/report
1. In image management work interface, move the cursor to “Select” driver and make it turn to “ ”,
press
『
Set
』
key, choose the driver and then press
『
Set
』
key again to confirm;
2. Move the cursor to the “Folder” dialog box, choose the desired folder, press
『
Set
』
key to confirm;
3. Move the cursor to the “File” dialog box, choose the desired file (image, video or report), press
『
Set
』
key to confirm;
4. If you choose a stored video, the Play button
will be displayed at the upper left corner of image
region. Move the cursor to
Play button
, press
『
Set
』
key, system will load video and automatically
play it;
5. Move the cursor to choose
「
Exit
」
button on the function region and press
『
Set
』
key, or directly
press
key to exit image management work interface.
19.5 Dicom archive
This function is used to transfer the saved images or reports to Dicom server.
1. In image management work interface, select the desired image or report;
2. Press “Dicom” button on the function region, it will start transferring image or report.
Attention:
1. When playing the video, do not perform other operations; if need to do, please press Pause
button
.
2. Click Play button
, after about 10s it starts automatically play video.
Attention:
1. This function can not used to transfer video files.
2. If need to transfer images or reports to Dicom server, you must first set the IP address of
Dicom server and properly connect to Dicom server. For Dicom server settings, see the
“Net Setting” in the System Preset.